Help plz.

Pebbles · **Posted:** Sat Sep 12, 2009 11:24 pm

Ok so I was putting bondo on my d50 and when I put everything back together my tail lights did'nt work. The blinkers, brake lights, and lights did'nt work. I changed all the bulbs and everything works but the lights. So when I turn my headlights on nothing comes on in the back. Everything else works but that. Any ideas?

iammotorsports · **Posted:** Sat Sep 12, 2009 11:59 pm

there should be a junction if wires either behind the rollpan or bumper on the bed that might have lost its ground or unplugged,relay,fuse?

Pebbles · **Posted:** Sun Sep 13, 2009 12:02 am

I will check it out tomorro morning when there is light. That's what I was thinking but wasn't to sure. I hope thats it. Thanks again. I'll let you know if that is the case tomorrow.

insanemitsu · **Posted:** Sun Sep 13, 2009 11:44 am

check the fuses sounds like you popped a fuse.

Ryan4dc · **Joined:** Wed Jul 01, 2009 5:34 pm **Posts:** 191

The one clip on the framerail on the passenger side? What did you work on?

Pebbles · **Posted:** Sun Sep 13, 2009 9:15 pm

I was doing bondo work around the taillights and just took them off and let the wire dangle but inside. Than primered around there and hooked it back up and it didn't work.

Ryan4dc · **Joined:** Wed Jul 01, 2009 5:34 pm **Posts:** 191

Could be a fuse then. Check em all?

Ryan4dc · **Joined:** Wed Jul 01, 2009 5:34 pm **Posts:** 191

Id grab a volt meter or a test light and start at the tail lights first. Then move to the clip on the framerail on the passenger side under the bed. should be over the exhaust pipe exit I think. havent had one for a while so not too sure about it. Did you paint the clip by accident?

qballd50 · **Posted:** Tue Sep 15, 2009 9:51 am

Ryan4dc wrote:

Id grab a volt meter or a test light and start at the tail lights first. Then move to the clip on the framerail on the passenger side under the bed. should be over the exhaust pipe exit I think. havent had one for a while so not too sure about it. Did you paint the clip by accident?

That Is What I Was Thinking, About Painting the Clip Where the Lights Plug In At!

Pebbles · **Posted:** Tue Sep 15, 2009 9:12 pm

Yes. That is also what I was thinking. Im thinking I'm going to buy some of that cleaner and a swab and just completelely clean it up. Than see if it works. If not than I will grab the meter and start from the back going forward. I did see some primer though so that could be the case. Hope so. lol, You know....This website is very cool. All you guys are so layed back and helpful. Havn't been on a forum like this for a while. Very glad I could find it. Thanks so much. I will update you guys on the scenerio later. Thanks again.

qballd50 · **Posted:** Thu Sep 17, 2009 9:24 am

We Are Glad Your Here Too!!
Just Keep us Updated when You Figure It Out!

Pebbles · **Posted:** Tue Sep 22, 2009 5:49 pm

I got the problem fixed. It was a bunch of shorts in the wire. All better now. Thanks for all the help guys.

Threads		Author	Replies	Views	Last post
Related topics
	signal help in 95 MM	L.K	1	265	Fri May 28, 2010 8:12 pm L.K
	Help plz.	Pebbles	11	586	Tue Sep 22, 2009 5:49 pm Pebbles
	3 Way sub/amp help...	Sparkey_STi	6	604	Sun Aug 07, 2011 12:41 pm Frizzy91

♦ Help plz.

Who is online

Members currently in chat

Last Updated Threads
In Tech Write Ups by Members » sound like real high rpm last post by: mxmikie about 4 hours ago In Buy, Sell, Trade, and Internet Deals » HELP 1992 mighty max in need of a good cylinder head last post by: mxmikie 05/18/2012 03:58pm In General Discussion » 4 runner bumper last post by: dropped87mitsu 05/18/2012 01:08pm In Wanted » WTB: Exhaust bits & pieces 90+ 2.4L 2WD last post by: DALE 05/17/2012 03:50pm In Engine » 1990 Mighty Max Burning too much fuel problem. last post by: MI-Mitsu 05/17/2012 03:10pm In Suspension » lowering... last post by: DALE 05/17/2012 01:35pm In Repair Tech » Help! New to Mighty Max Family and got big problems.... last post by: Mightymax94 05/16/2012 06:19pm In Buy, Sell, Trade, and Internet Deals » 1988 mighty max 4x4 extended cab pick up last post by: rxinhed 05/16/2012 01:01am In General Discussion » Mikuni Adjustments last post by: Number_7 05/15/2012 10:23pm In Repair Tech » Problems with 94 mighty max. Please help last post by: Mightymax94 05/15/2012 10:06pm
view all